|
Traceable Hygrometer/Thermometer Meter
Unit simultaneously displays humidity and temperature. One of the newest and fastest
humidity sensors ever developed displays full-range humidity changes in 1 second.
Ideal for recording wide humidity variations on a second-to-second basis.
- Serial RS-232-C output permits connection to any IBM*-compatible computer or datalogger
- Information can be imported into any existing database and, with the accessory Data
Acquisition System (below), captured, displayed on monitor, and stored. (Unit is
equipped with a sample program that allows you to store 100 readings; the complete
DAS-3* Data Acquisition System is required to transfer these readings to a computer
file.)
- Large display (13/8 in.H) shows temperature and humidity simultaneously
- Relative humidity resolution is 0.1% with ±3% RH accuracy; range is from 10 to 95%
RH
- Temperature is displayed in (user-selectable) °C or °F with resolution of 0.1°;
accuracy is ±1°C and range is 0° to 50°C (32° to 122°F)
- Memory recalls maximum, minimum, and average readings
- HOLD button freezes display for later reading
- An ISO 17025 certificate is provided to indicate instrument traceability to standards
provided by NIST
- Unit measures 11/4L x 3W x 7 in.H (3.2 x 7.6 x 17.8cm); weighs 9.5 oz. (269g)
- Supplied complete with 1 dia. x 61/4 in.L (2.5 x 15.9cm) probe, 40 in. (101.6cm)
cable, and 9V alkaline battery
- Accessories include 115V adapter, carrying case, and DAS-3 Data Acquisition System
(all sold separately, below)
|
|
Traceable® Hum./Temp./ Dew Point Meter Complete Description
Traceable unit
displays humidity to 0.01%—use for QC, ISO 9000, and R/D
Traceable® Digital Hygrometer/Thermometer/Dew Point instrument, by using a special
breed of artificial intelligence, provides a response time of under 10 seconds with
a resolution of 0.01%RH, 0.01°F/°C, and 0.01° dew point °F/°C. It samples one-and-a-half
times per second. "Fuzzy logic" algorithm pinpoints the exact answer almost instantly.
Fast response with high accuracy
Direct-reading instrument has an accuracy of ±1.5%RH and ±0.4°C. Results are reported
in both °F and °C from –40.00 to 220.0°F (-40.00 to 104.0°C) temperature, and from
-40.00 to 140.0°F (-40.00 to 60.00°C) dew point.
Certified Traceable to NIST
To assure accuracy an individually serial-numbered Traceable® Certificate is provided
from our ISO 17025 calibration laboratory accredited by A2LA. It indicates traceability
to standards provided by NIST (National Institute of Standards and Technology).
Clean room and food applications
Fulfills federal CLIA requirements and is ideal for hoods, clean rooms, food storage,
process control, incubators, desiccators, drug manufacturing, environmental chambers,
corrosion analysis, and inside/outside air monitoring. Four-digit LCD display can
be read from 10 feet. Rugged handheld unit is designed for years of service.
Hi/Lo memories, programmable alarms, and data output
Memory recalls both highest and lowest readings in dew point, temperature, and humidity
at any time. High and low alarms can be programmed in dew point, temperature, and
humidity. When an out-of-range condition is sensed, an alarm sounds and the display
flashes. Computer output through the accessory Data Cable permits data to be captured,
transferred, stored, and printed.
Size is 5-1/2 x 3-1/2 x 1-1/4 inches. Weight is 12 ounces. Probe length
is 7 inches. Cable length is 54 inches. Supplied with 9-volt battery for 1-year
intermittent usage or 100 continuous hours. AC adaptor (not supplied) is available.
Complete with Traceable® Certificate and ABS plastic carrying case. Replacement
battery Cat. No. 1112.
|
|
Large, bright, four-digit, LCD display.
Easy to use — no wicks to wet, no warm-up, no swinging, just point and read. Rugged
ABS (acrylonitrile-butadiene-styrene) exterior designed for years of precise, dependable
service.
To ensure accuracy, a 1µm thick, dielectric-polymer
layer absorbs water molecules through a thin-metal electrode and causes a capacitance
change proportional to relative humidity. A thermistor senses temperature.
A serial numbered certificate is provided
from an ISO 17025 calibration laboratory accredited by A2LA to indicate instrument
traceability to standards provided by the National Institute of Standards and Technology.
|
Humidity Accuracy: |
±1.5% RH |
|
Temperature Range: |
–40 to 104°C (–40 to 220°F), 0.01° resolution |
|
Dew Point Temp. Range: |
–40 to 60°C (–40 to 140°F), 0.01° resolution |
|
Temperature Accuracy: |
±0.4°C from 0 to 40°C, ±1°C, ends of range |
|
|
(±0.72°F from 32 to 104°F, ±1.8°F, ends of range) |
|
Dimensions: |
14L x 8.9W x 3.2H cm (51/2
x 31/2 x 11/4") |
|
Weight: |
1 kg (2.2 lbs.) |
|